TOPIC:

15-Jul-2014 Revision: 004935 LAB Actions

--15-7-2014 Update to FPC SVN Rev 28224
--15-7-2014 Synchronize with Lazarus SVN Rev 45873
--15-7-2014 MEGA-Build to All Host OSes-OK (must test FreeBSD32 again i386-freebsd.7z for make error:209)
--15-7-2014 Fix doceditor Building

01-Aug-2014 Revision: 004941 LAB Actions

--16-7-2014 Update pl_KControls to Ver 1.5.0 and CodeOcean Samples
--16-7-2014 Synchronize with Lazarus SVN Rev 45890
--17-7-2014 Update pl_BGRAbitmap to SVN Rev 774
--17-7-2014 Update pl_Castle to SVN Rev 13926
--17-7-2014 Update pl_ZeosDBO to SVN Rev 3227
--19-7-2014 Synchronize with Lazarus SVN Rev 45932
--19-7-2014 Update FPC to SVN Rev 28239
--20-7-2014 ADD to CTCenter settings, ability to NOT build tools
--20-7-2014 Update CTCenter Find dialog
--20-7-2014 ADD to Typhon IDE, CHM Builder Exernal Tool (ctchmbuilder)
--20-7-2014 ADD to Typhon IDE, Po Builder Exernal Tool (ctpobuilder)
--20-7-2014 ADD to Typhon IDE, Image Editor Exernal Tool (ctimageeditor)
--20-7-2014 ADD to Typhon IDE, UniEditor Exernal Tool (ctunieditor)
--20-7-2014 Update pl_ExtentIDE to Ver 1.5.2 (add new Exernal Tools)
--20-7-2014 Update FPC to SVN Rev 28245
--21-7-2014 Synchronize with Lazarus SVN Rev 45950
--22-7-2014 Update pl_ExControls to Ver 3.0.8 (add TplColorPalette component)
--26-7-2014 Update FPC to SVN Rev 28267
--26-7-2014 Synchronize with Lazarus SVN Rev 45985
--26-7-2014 Add, Update and Test ZenGL CodeOcean Samples
--29-7-2014 Update FPC to SVN Rev 28272
--30-7-2014 Fix Typhon IDE help system problem (FPC rollback Rev 27762 simpleipc.pp)
--31-7-2014 Fix Typhon IDE localization problems (with new Po Builder tool)
--31-7-2014 MEGA-Build to All Host OSes- ALL OK

13-Aug-2014 Revision 004950 LAB Actions

--03-8-2014 Update pl_ExControls to Ver 3.1.0.1
--03-8-2014 Update pl_ExDesign to Ver 3.1.0.1
--03-8-2014 Update pl_ColorLib to Ver 3.1.0.1
--05-8-2014 Update pl_ExSystem to Ver 3.1.0.1
--05-8-2014 Update pl_SynapseVS to Ver 1.6.0
--07-8-2014 Update pl_KControls to Ver 1.6.0 and CodeOcean Samples
--07-8-2014 Update FPC to SVN Rev 28331
--09-8-2014 Update pl_Castle to SVN Rev 13968
--09-8-2014 Update pl_ZeosDBO to SVN Rev 3227
--09-8-2014 Update pl_WST to SVN Rev 3461
--09-8-2014 Update pl_RX to SVN Rev 3461
--09-8-2014 Update pl_FPSpreadsheet to SVN Rev 3461
--09-8-2014 Update pl_RichView to SVN Rev 3461
--09-8-2014 ADD pl_RichMemo SVN Rev 3461
--11-8-2014 Update pl_ACS to Ver 3.3.1
--11-8-2014 Update pl_OnGuard to Ver 5.1.1
--11-8-2014 ADD pl_DataPort SVN Rev 9
--11-8-2014 Update pl_ECControls to Ver 0.0.1.9
--11-8-2014 Rename pl_Freefpider pkg to pl_FreeSpide
--11-8-2014 Update FPC SVN Rev 28381
--12-8-2014 Synchronize with Lazarus SVN Rev 46038
--13-8-2014 MEGA-Build to All Host OSes- ALL OK

21-Aug-2014 Revision: 004961 LAB Actions

--13-8-2014 Start Typhon IDE "Embedded Form Designer" Task
--14-8-2014 Update pl_GlassDocking to Ver 2.3.6
--14-8-2014 ADD to IDE Options->Desktop selection "Use Docking System"
--15-8-2014 ADD to IDE Options->Desktop selection "Use Embedded Form Designer"
--15-8-2014 ADD to GlassDocking options "Set Default" button
--16-8-2014 FIX lHelp executable start problem
--19-8-2014 Update FPC to SVN Rev 28469
--19-8-2014 Synchronize with Lazarus SVN Rev 46055
--19-8-2014 FIX WinCE Compilation
--21-8-2014 We finish Typhon IDE "Embedded Form Designer" lab Tests and Fixes.

30-Aug-2014 Revision: 004970 LAB Actions

--22-8-2014 FIX some "Embedded Form Designer" problems
--25-8-2014 Add basic support for MacOS 10.9.x
--27-8-2014 Update FPC to SVN Rev 28524
--27-8-2014 Synchronize with Lazarus SVN Rev 46078
--29-8-2014 MEGA-Build to All Host OSes- ALL OK


Note1: You can download and test this version from "CTCenter->Update Manager" and select CT Development Version
Note2: Please post to this topic any suggestion or problem or fix for LAB CT ver 5.00

debian 7 64 bit

problem download CT 5.0

Uploading finish, try again

Windows XP 32
update version 5
Remove and Build ALL
problems: make.exe

Thanks Sir
we fix and this at revision 004935

Help doesn't work in this version too.

1) Go to codetyphon/allzips and delete zzctdirver.ctv file
2) try to update again

1) Go to codetyphon/allzips and delete zzctdirver.ctv file
2) try to update again

Wich error this solution resolve?

With this action CTCenter will download ALL files from server
with zzctdirver.ctv file the CTCenter check server file version first
zzctdirver.ctv it's a simple text file...codetyphon/allzips files version index file...

01-8-2014 We release Lab CT rev 004941 Development Version
many fixes and many new tools
Please, test and report here...

Windows 8.1 x64
CTCenter->CrossBuild->FreePascal 32bits->FPC32 Build cross element arm-android (and others) ...
(extract last lines from commandbox)

C:/codetyphon/fpc/bin/i386-win32/rm.exe -f c:/codetyphon/fpcsrc/ide/units/i386-win32/compunit.ppu
C:/codetyphon/fpc/bin/i386-win32/rm.exe -rf units
C:/codetyphon/fpc/bin/i386-win32/rm.exe -f *.o *.ppu *.rst *.s *.a *.dll *.ppl
C:/codetyphon/fpc/bin/i386-win32/rm.exe -rf *.sl
C:/codetyphon/fpc/bin/i386-win32/rm.exe -f fpcmade.* Package.fpc ppas.bat script.res link.res
C:/codetyphon/fpc/bin/i386-win32/rm.exe -f *_ppas.bat
make[2]: Leaving directory `c:/codetyphon/fpcsrc/ide/compiler'
make[1]: Leaving directory `c:/codetyphon/fpcsrc/ide'
C:/codetyphon/fpc/bin/i386-win32/make -C installer distclean
make[1]: Entering directory `c:/codetyphon/fpcsrc/installer'
C:/codetyphon/fpc/bin/i386-win32/rm.exe -f install.exe writeidx.exe install.o writeidx.o libpinstall.a libpwriteidx.a libimpinstall.a libimpwriteidx.a
C:/codetyphon/fpc/bin/i386-win32/rm.exe -f units/i386-win32/scroll.ppu units/i386-win32/insthelp.ppu
C:/codetyphon/fpc/bin/i386-win32/rm.exe -rf units
C:/codetyphon/fpc/bin/i386-win32/rm.exe -f *.o *.ppu *.rst *.s *.a *.dll *.ppl
C:/codetyphon/fpc/bin/i386-win32/rm.exe -rf *.sl
C:/codetyphon/fpc/bin/i386-win32/rm.exe -f fpcmade.* Package.fpc ppas.bat script.res link.res
C:/codetyphon/fpc/bin/i386-win32/rm.exe -f *_ppas.bat
make[1]: Leaving directory `c:/codetyphon/fpcsrc/installer'
C:/codetyphon/fpc/bin/i386-win32/rm.exe -f build-stamp.*
C:/codetyphon/fpc/bin/i386-win32/rm.exe -f base.build-stamp.*
No se pudo encontrar C:\codetyphon\fpcsrc\compiler\utils\*.exe
No se pudo encontrar c:\codetyphon\fpcsrc\utils\*.exe

???????????????????????????????????????????????????????????
[ERROR]: win32 Cross Element for arm-android NOT Exists
sorry, build STOP
???????????????????????????????????????????????????????????


_______________________________________________________________

Terminate Action at 02/08/2014 10:34:11
Total time: 00:04:02.986
ExitCode : 0

In CTC 4.9 obtain same error
Win32 to Win64 work well ...

(full output in attach)

some words in UniEdit (dutch, deutsch ... no idea )
Font Type instead of Lettertype ... sound better for me
...nothing serious

Is the first release...

Hi!
What about debugger?
Doesn't work properly within CT 4.92 when using pl_glscene. GDB crashes/stops once hits ANY breakpoint.

What about constant "Floating point error"?
Logs are below. There were 2 errors ("Floating point error") and 2 dumps.

Some error (regression) was found. CT LAB ver 5.00 (rev 004941). Host OS: Win7 64. Target OS: WinCE. Target processor family: arm. Created simple GUI application. Set the option "target processor" to "default" and build app - successful. If set the option "target processor" to any other value (for example "ARMV7") and build app - compile error: unit1.pas(2285,0) Error: Error while assembling exitcode 1. Builded application (with option "default") work fine on my target device, but I think this is important.

LazPaint updated to 6.1 and Turbobird 1.2 ... nice tools

4aiman wrote: Hi!

Warning: Spoiler!

chaiman@teawork:~$ typhonstart32 %f
Adding "%f" as a parameter
 is a file
TTyphonManager.Run starting /usr/lib/codetyphon/typhon/bin32/typhon ...
TMainIDE.ParseCmdLineOptions:
  PrimaryConfigPath="/home/chaiman/.typhon32"
  SecondaryConfigPath="/etc/typhon"
FindMissingClass XPManifest1:TXPManifest IsInherited=False
FindMissingClass Query1:TQuery IsInherited=False
TLazSourceFileManager.LoadLFM loading nested class TQuery needed by /home/chaiman/Abitur2/F_Main.pas
TLazSourceFileManager.FindComponentClass Failed finding reference of TQuery in /home/chaiman/Abitur2/F_Main.pas
----------------

(typhon:7807): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()
TLazSourceFileManager.LoadLFM DoLoadComponentDependencyHidden NestedClassName=TQuery failed for /home/chaiman/Abitur2/F_Main.pas
WARNING: command line file not found: "/home/chaiman/%f"
WARNING: command line file not found: "/home/chaiman/%f"
NOTE: Window with stalled focus found!, faking focus-out event
NOTE: Window with stalled focus found!, faking focus-out event
TApplication.HandleException Invalid floating point operation
  Stack trace:
  $088DFF17
  $082129A8
  $0821280E
  $08073B18
  $0820D454
  $08203460
  $08204664
  $080A253D
  $0829F479
  $0826B653
  $082760EC
  $082765BD
  $B720CEBE
  $0DB66240

(typhon:7807): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()
NOTE: Window with stalled focus found!, faking focus-out event
NOTE: Window with stalled focus found!, faking focus-out event
NOTE: Window with stalled focus found!, faking focus-out event
NOTE: Window with stalled focus found!, faking focus-out event
NOTE: Window with stalled focus found!, faking focus-out event
NOTE: Window with stalled focus found!, faking focus-out event
TApplication.HandleException Invalid floating point operation
  Stack trace:
  $088DFF17
  $082129A8
  $0821280E
  $08073B18
  $0820D454
  $08203460
  $08204664
  $080A253D
  $0829F479
  $0826B653
  $082760EC
  $082765BD
  $B720CEBE
  $0DB66240

(typhon:7807): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

(typhon:7807): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()
NOTE: Window with stalled focus found!, faking focus-out event
NOTE: Window with stalled focus found!, faking focus-out event
NOTE: Window with stalled focus found!, faking focus-out event
TYPHON END - cleaning up ...
[TMainIDE.Destroy] A 
[TMainIDE.Destroy] B  -> inherited Destroy... TMainIDE
[TMainIDE.Destroy] END

Re-posting, since I found the source of "Invalid floating point operation"
Once Assembler window is closed CT stops to throw this error.
Note: Even the default project behaves like this for me.

Oh, I've updated to beta CT 5.0 and the error above has gone nowhere.
Currently my OS is Xubuntu 14.04 (latest updates)

Oh, also libraries status tab is trying to find some libs in all-wrong places or of an all-wrong version.
While I can understand the absence of some QT libs, I just can't get why some other libs are missing after the "Install system libraries" option has been selected:


Currently my libgtkglext is of version 1.2, not 1.0:

So, why not search for some basic name and make symlinks if CT needs other versions and there's NO required version of any particular lib but there IS a higher version?
Or maybe it's worth trying to add some repos to OS to ensure there's the needed version of any lib CT, well, needs?

Anyway, please, pay attention to the "Invalid utf-8 string" error too.
Building CT I still can see messages about ANSI<->UTF-8 wrong conversion.

13-8-2014 We release Lab CT Revision 004950 Development Version
many fixes and many new componets
Please, test and report here...

We Start Typhon IDE "Embedded Form Designer" task
on Windows (32/64) ALL working OK
but for other Host OSes (Linux, FreeBSD Solaris, etc) we must make a lot of work

screens soon...

sternas wrote: We Start Typhon IDE "Embedded Form Designer" task

This is incredible news. Can't wait to try it!

Embedded form designer missing and buggy docking are the only things in my wish list at the moment to consider IDE feature complete. Maybe it is good time now to take a look at that old docking bug when tabbed layout is used. To remind you, if any window is tabbed into another one docking works fine until IDE exit, but on IDE restart docking breaks apart completely and we have to restore docking XML config file from backup. The problem is described here:
www.pilotlogic.com/sitejoom/index.php/fo...king-a-second-chance
I will be glad to test any docking fixes if needed.

Thank you once more for hard work!