TOPIC:

Fresh Mac-mini user and failed on first day
Small IDE did not built, so I tried Freepascal alone instead. But it did not succeed neither: wrong CPU (probably not aarch64 ?)
Also the platform options 11) and 12) do not change anything, it remains always: Platform=cocoa  Multiarch Mode=0

Additionally this dir is empty:
/usr/local/codetyphon/binBase/aarch64-darwin/


==================================================== 
CodeTyphon Studio 8.50 Setup for Darwin32  
Settings: Platform=cocoa  Multiarch Mode=0
====================================================     
0) Install System Libraries  
1) Run CodeTyphon Center (CTC)     
  11) -- Platform (widget) Setup  
  12) -- Multi-Architecture Setup     
3) Remove FreePascal  
4) Remove and Build FreePascal     
5) Remove Typhon IDE  
6) Remove and Build Typhon IDE     
7) Remove ALL  
8) Remove and Build ALL     
9) EXIT   
>>> Select an action (press 0..9 key): 4
==============================================================                
Remove and Build ALL
==============================================================

---

    Please Wait... Removing FreePascal 32

---

[INFO]: FreePascal Bin Directory Removed OK[INFO]: FreePascal Source Directory Removed OK[INFO]: LLDB Directory NOT EXIST, nothing to do ...

---

Please Wait... Removing CrossBuild Engine Directory

---

[INFO]: CrossBuild Engine Directory NOT EXIST, nothing to do ....

---

Please Wait... Removing Toolchains Library Directory

---

[INFO]: Toolchains Library Directory NOT EXIST, nothing to do ...[INFO]: Libraries Directory NOT EXIST, nothing to do ...   [INFO]: All FreePascal parts removed from disk   ==============================================================            Build FreePascal 32 for Darwin==============================================================   [INFO]: FPC32 Source files not exists, extracting...

---

         Extract FreePascal From Zip File

---

sudo: unable to execute /usr/local/codetyphon/binBase/i386-darwin/7zr: Bad CPU type in executable   

---

     Extract darwin32 Toolchains Library...

---

sudo: unable to execute /usr/local/codetyphon/binBase/i386-darwin/7zr: Bad CPU type in executablechmod: /usr/local/codetyphon/binToolchains/: No such file or directorysudo: unable to execute /usr/local/codetyphon/binBase/i386-darwin/7zr: Bad CPU type in executablechmod: /usr/local/codetyphon/binToolchains/: No such file or directory   

---

     Extract Libraries...

---

sudo: unable to execute /usr/local/codetyphon/binBase/i386-darwin/7zr: Bad CPU type in executablesudo: unable to execute /usr/local/codetyphon/binBase/i386-darwin/7zr: Bad CPU type in executablesudo: unable to execute /usr/local/codetyphon/binBase/i386-darwin/7zr: Bad CPU type in executablechmod: /usr/local/codetyphon/binLibraries/: No such file or directory

---

[INFO]: Extract FreePascal source finish   [INFO]: FPC32 Binary files not exists, extracting...   

---

       Install FPC32 Binary Files

---

   sudo: unable to execute /usr/local/codetyphon/binBase/i386-darwin/7zr: Bad CPU type in executable   [DONE] MacOS 10.14 make crt1.xx.xx.o symlink to /usr/local/codetyphon/fpc/fpc32/bin/i386-darwin/crt1.xx.xx.o    [DONE] MacOS 10.15 make crt1.xx.xx.o symlink to /usr/local/codetyphon/fpc/fpc32/bin/i386-darwin/crt1.xx.xx.o     

---

        Clean FreePascal 32

---

gmake: *** Keine Regel, um „clean“ zu erstellen.  Schluss.

---

        Build FreePascal 32 MultiArch=0

---

gmake: *** Keine Regel, um „all“ zu erstellen.  Schluss.   

---

        Install FreePascal 32

---

gmake: *** Keine Regel, um „install“ zu erstellen.  Schluss.   

---

        Clean FreePascal 32

---

gmake: *** Keine Regel, um „clean“ zu erstellen.  Schluss.   

---

        Copy FreePascal 32

---

cp: /usr/local/codetyphon/fpc/newfpc/bin/*: No such file or directorycp: /usr/local/codetyphon/fpc/newfpc/share/*: No such file or directorycp: /usr/local/codetyphon/fpc/newfpc/lib/fpc/3.3.1/*: No such file or directorycp: /usr/local/codetyphon/fpc/newfpc/lib/fpc/*: No such file or directorymv: rename /usr/local/codetyphon/fpc/fpc32/ppc386 to /usr/local/codetyphon/fpc/fpc32/bin/i386-darwin/ppc386: No such file or directory   ???????????????????????????????????????????????????[ERROR]: FreePascal 32 NOT build???????????????????????????????????????????????????