Welcome, Guest
Username: Password: Remember me
Lab CT Version, news, test results, new features request and suggestions
  • Page:
  • 1
  • 2

TOPIC:

CT LAB ver 6.00 7 years 3 months ago #10330

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
  • Posts: 4506
  • Thank you received: 1100


LAB CT version 6.00



*** 05-12-2016 LAB CT 6.00 Revision 005910 *** LOG
*** 11-01-2017 LAB CT 6.00 Revision 005930 *** LOG


NOTE 1: REPLACE Typhon SynRegExpr.pas unit with FPC RegExpr.pas
NOTE 2: REBUILD all QT4 Libraries libQt4Pas.so, update your Host PC files
NOTE 3: REBUILD all QT5 Libraries libQt5Pas.so, update your Host PC files

-ADD Support for Mageia 5.1 Linux
-ADD Support for Fedora 25 Linux
-ADD Support for Korora 25 Linux
-ADD Support for GhostBSD 10.3
-ADD Support for CentOS 7-1611 Linux
-ADD Support for OpenIndiana "Hipster"
-ADD Support for LinuxMint 18.1 Linux
-ADD Support for Kubuntu 16.10 Linux
-ADD Support for Debian SID (v9.0) Linux

-Update GDB to ver 7.12 for win32 and win64 (Released: 07-10-2016, build with CTCenter.GDB Builder)

-Update lz_sqldb to Ver 6.0.1
-Update lz_TodoList to Ver 6.0.1
-Update lz_TPIPro to Ver 6.0.1
-Update lz_Report to Ver 6.0.1
-Update lz_ReportPdfExport to Ver 6.0.1
-Update lz_taChart to Ver 6.0.1
-Update lz_ChmHelp to Ver 6.0.1
-Update lz_ChmHelpIDE to Ver 6.0.1
-Update lz_SimpleIDEintf to Ver 6.0.1
-Update lz_PoChecker to Ver 6.0.1
-Update lz_DateTimeCtrls to Ver 6.0.1
-Update lz_GoogleAPI to Ver 6.0.1
-Update pl_AGGPas to Ver 6.0.1
-Update pl_AGGPasVS to Ver 6.0.1
-Update pl_APELib to Ver 6.0.1
-Update pl_ExDesign to Ver 6.0.1
-Update pl_ZMSQL to Ver 6.0.1
-Update pl_Orpheus to Ver 6.0.1
-Update pl_ColorLib to Ver 6.0.1
-Update pl_ECControls to Ver 6.0.1 (Internal ver 0.9.6.10)
-Update pl_GaiaGIS to Ver 6.0.1
-Update pl_ORCA to Ver 6.0.1
-Update pl_ORCA3D to Ver 6.0.1
-Update pl_TitanScript to Ver 6.0.1
-Update pl_VirtualTreesExtra to Ver 6.0.1
-Update pl_Win_GDI to Ver 6.0.1
-Update pl_Win_DirectXUT to Ver 6.0.1
-Update pl_ZeosDBO to Ver 6.0.1 Source SVN Rev 3942
-Update pl_PasDoc to Ver 6.0.1 Source SVN Rev 1410
-Update pl_Indy to Ver 6.0.1 Source SVN Rev 5377
-Update pl_PascalSCADA to Ver 6.0.1 Source SVN Rev 1128
-Update pl_WST to Ver 6.0.1 Source SVN Rev 5386
-Update pl_RichMemo to Ver 6.0.1 Source SVN Rev 5386
-Update pl_RX to Ver 6.0.1 Source SVN Rev 5386
-Update pl_BGRAbitmap to Ver 6.0.1 Source GIT hash : d6ac9e02d6c4dd86b3d913c11c88158d49007b8c
-Update pl_BGRAbitmap4fpgui to Ver 6.0.1 Source GIT hash : d6ac9e02d6c4dd86b3d913c11c88158d49007b8c
-Update pl_BGRAbitmap4lcl_opengl to Ver 6.0.1 Source GIT hash : d6ac9e02d6c4dd86b3d913c11c88158d49007b8c
-Update pl_BGRAbitmap4nogui to Ver 6.0.1 Source GIT hash : d6ac9e02d6c4dd86b3d913c11c88158d49007b8c
-Update pl_BGRAbitmap4noGUI_OpenGL to Ver 6.0.1 Source GIT hash : d6ac9e02d6c4dd86b3d913c11c88158d49007b8c
-Update pl_BGRAControls to Ver 6.0.1 Source GIT hash : 526fd9f323ce20f556ebd1a9b84b45a377be0a2b
-Update pl_Lape to Ver 6.0.1 Source GIT hash : aeedc08628d5082b5296f214eeb43976680cd9c1
-Update pl_Solutions to Ver 6.0.1 Source GIT hash : caa2e025b7022169bc5173f5a3602a8ef1943a88
-Update pl_VampyreImaging to Ver 6.0.1 Source HG hash : da316a249bf374840abb7c7a09d895b576ac24dc
-Update pl_OpenWeather to Ver 6.0.1 Source HG hash : 4c7120c436b74dccb1209f8211170aef4e8f8cbe
-Update pl_LuiControls to Ver 6.0.1 Source GIT hash : 57bd28a680ed268d8c9662c8902d4efdd74e9883
-Update pl_JVCL to Ver 6.0.1 Source SVN Rev 5559
-Update pl_SpkToolBar to Ver 6.0.2 Source SVN Rev 5559
-Update pl_RX to Ver 6.0.2 Source SVN Rev 5559
-Update pl_FPSpreadsheet to Ver 6.0.2 Source SVN Rev 5563
-Update pl_GLScene to Ver 6.0.1 Synchronize Source with SVN Rev 5563
-Update pl_glscene_cgshader to Ver 6.0.1 Synchronize Source with SVN Rev 5563
-Update pl_glscene_ngd to Ver 6.0.1 Synchronize Source with SVN Rev 5563
-Update pl_glscene_ode to Ver 6.0.1 Synchronize Source with SVN Rev 5563
-Update pl_glscene_openal to Ver 6.0.1 Synchronize Source with SVN Rev 5563
-Update pl_glscene_sdl to Ver 6.0.1 Synchronize Source with SVN Rev 5563

Synchronize with FreePascal 3.1.1 Source 11-01-2017 SVN Rev 35276




Note1: You can download and test this version from "CTCenter->Update Manager" and select CT "Development Version"
Note2: Please post to this topic any suggestion or problem or fix for LAB CT ver 6.00


What Is LAB CT version ?
PilotLogic Architect and Core Programmer
Attachments:
The following user(s) said Thank You: FredyCC

Please Log in or Create an account to join the conversation.

Last edit: by Sternas Stefanos.

CT LAB ver 6.00 7 years 3 months ago #10331

  • usbdoo
  • usbdoo's Avatar
  • Visitor
  • Visitor

Please Log in or Create an account to join the conversation.

CT LAB ver 6.00 7 years 3 months ago #10341

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
  • Posts: 4506
  • Thank you received: 1100
We release LAB CT 6.00 Revision 005910
Please, test report or suggest

Have Fun
PilotLogic Architect and Core Programmer

Please Log in or Create an account to join the conversation.

Last edit: by Sternas Stefanos.

CT LAB ver 6.00 7 years 3 months ago #10342

  • usbdoo
  • usbdoo's Avatar
  • Visitor
  • Visitor
CT6.0 FPC64 arm-linux :RapberryPi2 not build program
like this

www.pilotlogic.com/sitejoom/index.php/fo...-build-program#10314

Please Log in or Create an account to join the conversation.

CT LAB ver 6.00 7 years 3 months ago #10343

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
  • Posts: 4506
  • Thank you received: 1100
Sir
the problem is in FreePascal
we try to fix this...
PilotLogic Architect and Core Programmer
The following user(s) said Thank You: usbdoo

Please Log in or Create an account to join the conversation.

CT LAB ver 6.00 7 years 3 months ago #10348

  • xcod
  • xcod's Avatar
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 45
  • Thank you received: 2
hi
please! add FBDataSet
Is a easy-to-use library of Lazarus, components for work with InterBase and Firebird.
shamangrad.ru/project.php?act=view&prj=FBDataSet
svn.shamangrad.ru/FBDataSet

Please Log in or Create an account to join the conversation.

CT LAB ver 6.00 7 years 3 months ago #10349

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
  • Posts: 4506
  • Thank you received: 1100
Thanks Sir
we will test and report
PilotLogic Architect and Core Programmer

Please Log in or Create an account to join the conversation.

CT LAB ver 6.00 7 years 3 months ago #10362

  • usbdoo
  • usbdoo's Avatar
  • Visitor
  • Visitor
Debian GNU/Linux 8.5 (jessie)
CT 6.00

unit LazUTF8SysUtils; nowUTC() work ok (is always ok)
now() work wrong!!
date() work wrong!!
1) Run ct program and ShowMessage(timetostr(now)); time is ok
2) Change the clock on your computer.
terminal put this:
sudo date +%Y%m%d%T -s "20161003 11:29:00"
3) ShowMessage(timetostr(now)) Again. Then Time is wrong and date() is wrong

if program restart then time and date work ok.
Problem is:
if first start program and then change date or time.

Please Log in or Create an account to join the conversation.

Last edit: by usbdoo.

CT LAB ver 6.00 7 years 3 months ago #10363

  • usbdoo
  • usbdoo's Avatar
  • Visitor
  • Visitor
Debian GNU/Linux 8.5 (jessie)
CT5.80

all date, new, time work ok

Please Log in or Create an account to join the conversation.

CT LAB ver 6.00 7 years 3 months ago #10364

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
  • Posts: 4506
  • Thank you received: 1100
Please Sir
can you attach a sample project with the problem ?
PilotLogic Architect and Core Programmer

Please Log in or Create an account to join the conversation.

CT LAB ver 6.00 7 years 3 months ago #10372

  • usbdoo
  • usbdoo's Avatar
  • Visitor
  • Visitor
GMT +1
1) if compare sistem time and time on Run ct program ShowMessage(timetostr(now)) this is ok
2) sudo date +%Y%m%d%T -s "20161003 11:29:00" run linux terminal (sistem date and date is change )
while the CT program is running
3) ShowMessage(timetostr(now)) Now time is not equale sistem time

Problem is: while running the CT program change the system date time

Please Log in or Create an account to join the conversation.

CT LAB ver 6.00 7 years 2 months ago #10417

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
  • Posts: 4506
  • Thank you received: 1100
We release LAB CT 6.00 Revision 005930
Please, test report or suggest

Have Fun
PilotLogic Architect and Core Programmer

Please Log in or Create an account to join the conversation.

CT LAB ver 6.00 7 years 2 months ago #10423

  • Bram van Vliet
  • Bram van Vliet's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 13
  • Thank you received: 0
Cross compiling to arm from the IDE no longer works on Linux 64 bit

I have 2 build modes in my project, one for Linux 64 and one for arm (beaglebone). When i select the arm build mode i still get a Linux 64 executable. With 5.8 it was fine and the exe gets build for the correct platform.

Thanks for all the hard work!

OS = Ubuntu 16.04 and Linux Mint 18.1 both 64 bit

Please Log in or Create an account to join the conversation.

CT LAB ver 6.00 7 years 2 months ago #10424

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
  • Posts: 4506
  • Thank you received: 1100
Thanks Sir
we will fix this
PilotLogic Architect and Core Programmer

Please Log in or Create an account to join the conversation.

CT LAB ver 6.00 7 years 2 months ago #10457

  • Matis A.
  • Matis A.'s Avatar
  • Away
  • Moderator
  • Moderator
  • Posts: 1047
  • Thank you received: 145
So many tests....
PilotLogic Core Programmer

Please Log in or Create an account to join the conversation.

Last edit: by Matis A..

CT LAB ver 6.00 7 years 1 month ago #10475

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
  • Posts: 4506
  • Thank you received: 1100
==== END OF LAB Stage ====

We release CodeTyphon Studio Ver 6.00
PilotLogic Architect and Core Programmer

Please Log in or Create an account to join the conversation.

CT LAB ver 6.00 7 years 1 month ago #10482

  • Klaus Riesterer
  • Klaus Riesterer's Avatar
  • Visitor
  • Visitor
Great Work!

DataDesktop can't connect MySQL 5.7

It would also be great to find MariaDB as Connector !

Please Log in or Create an account to join the conversation.

Last edit: by Klaus Riesterer.

CT LAB ver 6.00 7 years 1 month ago #10484

  • Bram van Vliet
  • Bram van Vliet's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 13
  • Thank you received: 0
Hello, thnx for the new version!

At the moment cross compiled applications from Linux x86-64 to arm V7 (Beaglebone) is still broken.

Simply compile a empty project with a single empty form with target os Linux, cpu family arm, model v7a. Starting the resulting binary on the beaglebone results in a exception of type EReadError being displayed originating from FORMS.PP with as additional info: Reading Form1.Left: Unknown property "Left". Compiling a empty project with target os, cpu and model set to default works fine.

When cross compiling the same (empty) project with V5.9 the resulting binary works without problems.

os: XUbuntu 16.04 X86-64 & Debian on Beaglebone Black.

Please Log in or Create an account to join the conversation.

CT LAB ver 6.00 7 years 1 month ago #10485

  • Sternas Stefanos
  • Sternas Stefanos's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
  • Ex Pilot, M.Sc, Ph.D
  • Posts: 4506
  • Thank you received: 1100
If you want to help us,
because we don't have Beaglebone Black with ARMV7A.

Replace to /usr/codetyphon/ScriptsLin/crossbuild//ln_FPCx_Build_Element_arm_linux_Cubieboard.sh
at the end of line 70 :
CROSSOPT="-CaEABIHF -CpARMV6 -CfVFPV2 -OoFASTMATH" with
CROSSOPT="-CaEABIHF -CpARMV7A -CfVFPV3 -OoFASTMATH"

and rebuild arm-linux-Cubieboard FPC Cross element
PilotLogic Architect and Core Programmer

Please Log in or Create an account to join the conversation.

Last edit: by Sternas Stefanos.

CT LAB ver 6.00 7 years 1 month ago #10511

  • Miran Horjak
  • Miran Horjak's Avatar
  • Visitor
  • Visitor
Debian GNU/Linux 8.5 (jessie)

Cross Compiling on Rasppery pi 2 not work

Program compile ok.
But when start program I get

HandleExeption error reading fmtest.Left: Unknown propert y: "Left"

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
  • 2